Dynafit Blacklight 88 Ski Set

DESCRIPTION:
The new ski set was created to meet the needs of ambitious ski mountaineers looking for a very lightweight set up and contains the Blacklight 88 ski, Blacklight Long Travel binding and skins. Unpack and ski.

Just take it out of the box and you're on your way: the lightweight and versatile men's Blacklight 88 Speed ski set performs best in high altitude terrain and all snow conditions.

Want to save yourself long searches to find the perfect combination of ski, binding and skins? No problem, DYNAFIT's ski touring sets are made for that: pre-assembled and perfectly matched from a technical standpoint, they make ski touring even easier and more fun. You can simply rely on the years of experience of DYNAFIT's professionals, who have created the perfect set up for you: just order the set, take it out of the box, have the binding calibrated by a specialist dealer, and you're ready to ski.

The Blacklight 88 Speed ski set is the right choice for high-level ski mountaineering, when you need efficiency and light weight even on the most challenging terrain. The set up contains Blacklight 88 skis, Blacklight Long Travel binding and matching skins from POMOCA:

the Blacklight 88 ski weighs just 1,080 g (165 cm) with a width at the center of 88 mm, making it DYNAFIT's lightest multi-purpose ski, it is easy to handle and suitable for all snow conditions. The edge is made of 100 percent UD carbon: UD is short for "unidirectional" and indicates the arrangement of carbon fibers. This construction has higher tensile strength and greater strength than classic carbon construction while maintaining a lower weight, and has a core of 100 percent fine Paulownia wood. The 3D structure reduces inertia before and after the binding area, thus decreasing the overall weight of the ski for very stable skiing at a reduced weight. To ensure the best transmission of energy from the skier to the ski, the Blacklight has a full-length ABS sidewall construction. In addition, the base has a special race finish for even more speed.

The matching binding, the Blacklight Long Travel, allows speed on the ascent and is also good on the descent. Minimalist and lightweight, just 420 grams, this stopper binding combines the features of an ascent and weight-oriented binding with the advantages of a classic ski mountaineering binding. Thanks to the perfect bayonet fit of the heel unit, energies are transmitted excellently from the binding to the ski, increasing responsiveness and downhill performance. Step-In Side Towers make it easier to get on the toe by more than 30 percent, so you can get going in seconds, while increasing lateral sensitivity on the descent. The binding can be adjusted over a 50-mm gap at the heel to accommodate different sole lengths. The heel lift has two levels, between which to change quickly with the help of the pole, The release values can be adjusted laterally to DIN values from 5 to 12 while the vertical release is fixed. To increase safety in icy or crusty snow, rampants can be mounted, Like all other DYNAFIT bindings, the Blacklight is also made in Germany and is covered by DYNAFIT's Lifetime Guarantee.

The set is completed by Blacklight 88 skins, made in Switzerland with typical POMOCA quality, which have excellent gliding and climbing characteristics.